Netgear WN2500RP extender setup
Netgear WN2500RP extender setup
The Netgear WN2500RP Range Extender can repeat your existing network to extend its reach. Plug in an ethernet receipt or ticket printer if you can’t run a cable directly to the router.

To Setup Netgear WN2500RP extender

  • Connect the power cable. Plug the other end into an outlet. Press the power button.
  • Wait for the power light to turn solid green.
  • Connect the extender to a network.
  • Connect the extender to your network so it has internet access. Pick Automatic WPS Setup if your router supports it (look for a button labeled “WPS” or check the user guide).Otherwise, scroll down to Manual Setup.
  • Press the WPS button on the side.
  • Wait for the light on the front to blink .
  • (optional) Unplug the extender from power, place it where you want, and plug it back in.
  • The extender’s new WiFi network(s) begin with your router’s WiFi name + “_2GEXT” or “_5GEXT”. They use the same password as your router.

    Related Article:- WN2500rp setup
    Common issues during connecting Netgear WN2500rp Extender
    Can not access WN2500rp extender